GDW G95 Tail Servo

G95 is a 760us narrow frequency HV Tail Specific Servo.

G95 is a narrow-band tail-locking servo that cannot be directly plugged into the receiver. It can only work by selecting 760us through the gyroscope. The tail-locking servo is a special narrow-band signal, which cannot work normally when plugged into the receiver or the servo tester. (It is shown that the receiver does not move, most of the steering gear test meanings are also motionless, a few steering gear testers can make the steering move a little bit, anyway, it is not working properly) Only plug in the gyroscope, and choose the correct narrow Only the frequency signal can make the tail lock servo move (the gyroscope that is not connected to the computer and set up cannot make the tail lock servo move because the correct signal is not selected, K8 selects the second row in the tail lock page)